Key chains are available in a variety of styles and colours, as well as a variety of materials. Even if you’re just getting started with woodworking, you may want to make a key chain out of it. For a handmade key chain, wood is one of the easiest materials to work with. You can make a custom key chain out of wood with a few simple tools and a little patience.
You may make custom wood keychains by choosing the wood you want to use. You may use whatever kind of wood you choose, but if you like a more durable wood or tree wood, you may want to do so. Balsa should not be used. It’s easy to carve, but the wood is quite pliable and may be destroyed easily.
Use your wood to carve out a design.
Your abilities are the key to the design’s complexity. You may be able to carve a little animal or symbol. In the absence of carving skills, use a piece of scrap wood to create a one-of-a-kind piece of art.
Drill a hole
A little hole should be drilled on the top of your wood keychains. As a result, smaller is better. The hole may be extended later if you discover that you need additional room. In certain cases, you may be able to drill a hole into the hardwood surface with your key chain. You should hang your key ring in this location.
Give your key chain a polished appearance by sanding it down with a little piece of sandpaper. It isn’t required that it be faultless for it to be effective. Keep some of the rough edges untouched if you want a more natural look.
Transparent varnish may be applied to your key chain. It won’t take long. Cover it with a sheet or towel and let it dry out. There are several ways to shield it from the weather, but this is the most effective.
When you’re done with the piece of wood, insert a metal key ring into the drilled hole. Make sure that the ring can be put into the hole without any problems. If required, increase the diameter of the hole by a few millimetres at a time until you reach the desired size.